Verified surface-burning performance, elastomer selection, and cross-industry sealing solutions from BP Materials UK (Calorpyro / Berzelius®).
Published by: BP Materials UK (www.bpmaterials.uk) | Standards: UL 723 (ASTM E84), UL 555S, UL 94 | Inquiries: sales@berzelius.uk
In modern commercial buildings, transit hubs, and industrial facilities, heating, ventilation, and air conditioning (HVAC) ductwork connects every zone of a structure. Without reliable fire duct seals and smoke damper gaskets, a localized fire can breach fire-rated partitions and spread flames, smoke, and toxic gases throughout the entire building.
Because smoke is the leading cause of death in fires, specifying independently tested sealing materials is a critical life-safety decision. At BP Materials UK (Calorpyro / Berzelius®), our Fire Retardant Silicone Rubber Profiles are engineered for high-stakes containment—combining extreme temperature resilience from −50°C to +350°C with official UL 723 (ASTM E84) testing by UL Solutions.
1. Verified UL 723 (ASTM E84) Surface Burning Performance
Under UL 723, Eleventh Edition (ASTM E84)—Test for Surface Burning Characteristics of Building Materials—materials are evaluated for both flame spread and smoke development during a 10-minute fire exposure. In independent UL Solutions testing conducted under the Commercial Inspection and Testing Services (CITS) program (Assignment No. 4791040268; Test Code NTN12132303; December 2023), Calorpyro fire-retardant silicone strips achieved the following benchmark results:
UL 723 (ASTM E84) Test Parameter | Measured Result | Test Details / Notes |
Flame Spread Index (FSI) | 0 | Zero surface flame spread rating |
Calculated Flame Spread (CFS) | 0.00 | Area under flame curve: 0.0 ft.-min |
Maximum Flame Spread | 0.0 ft | No flame propagation along sample |
Time to Ignition | 50 seconds | 10-minute standard test duration |
Smoke Developed Index (SDI) | 25 | Low smoke generation profile |
Calculated Smoke Developed (CSD) | 27.1 | Smoke curve area: 25.48 Obs-min. |
Test Configuration | 2 Silicone Strips | 8 in. off center; Rods & Wire mounting |
Achieving an FSI of 0 and an SDI of 25 provides MEP engineers and fire damper OEMs with verified proof of self-extinguishing, low-smoke performance—helping streamline UL compliance for finished HVAC and building safety assemblies.
2. Dense Silicone vs. Closed-Cell Silicone Sponge in HVAC Systems
Different zones of an HVAC and life-safety network require distinct mechanical sealing characteristics. BP Materials UK manufactures both dense and sponge silicone profiles to address every point of vulnerability:
- Dense Fire-Retardant Silicone Profiles: Engineered for Fire Dampers, Smoke Dampers, Airfoil Blades, and Louvers, these profiles create a tight, durable barrier that prevents flames, smoke, and toxic gases from crossing fire-rated partitions.
- Closed-Cell Silicone Sponge Gaskets: Designed for applications requiring extra cushioning and padding inside HVAC units. Beyond serving as a compressible space filler or barrier, closed-cell silicone sponge delivers effective thermal and acoustic insulation while protecting against water, dust, and moisture—making it an ideal choice for exterior sealing.
- Complementary HVAC Products: To support complete ductwork and mechanical installations, we also supply pipe support clamps, acoustic solutions, pre-insulated air duct panels, tapes, expansion joints, and bellows.
3. Comparing Berzelius® & Calorpyro Silicone Elastomer Solutions
Selecting the right silicone compound depends on operating temperature, compression requirements, fire-rating standards, and chemical exposure:
Product Line | Core Performance Advantage | Typical Applications |
Fire-Retardant Dense Silicone Profiles | UL 723 (FSI 0, SDI 25), UL 555S & UL 94 compliance; self-extinguishing; −50°C to +350°C | Fire & smoke damper blade seals, airfoil seals, louvers, HVAC air duct gaskets, enclosures |
Fire-Rated Closed-Cell Silicone Sponge | Compressible airtight sealing, low smoke, thermal/acoustic insulation, water & dust barrier | HVAC access panels, fire doors, exterior weatherproof barriers, space fillers |
Fluorosilicone Rubber Products | High-temperature stability combined with resistance to fuels, oils, and non-polar solvents | Aerospace trim seals, oil & gas equipment, chemical processing seals |
Co-Extrusion & Self-Adhesive Profiles | Dual-durometer durability, UV and ozone immunity, fast installation | Aluminium curtain walls, architectural façades, windows, and doors |
Solid Silicone Setting Blocks & Pads | Continuous resiliency across wide thermal swings and mechanical loads | Architectural glazing support, high-temperature vibration isolation |
Liquid Silicone Rubber (LSR) | Two-component chemically enhanced precision molding with tight tolerances | Complex industrial, electrical insulation, and custom molded components |
Engineering Selection Note
Standard silicone rubber offers outstanding heat, UV, ozone, and electrical-insulation performance, but it is not recommended for heavy mechanical abrasion, high tear/cut shear, or direct exposure to oils, fuels, acids, and solvents. For fuel, oil, and non-polar solvent environments, specify Berzelius® Fluorosilicone.
4. Proven Performance Across Key Industries
While HVAC fire and smoke containment is a flagship application, Calorpyro fire-retardant silicone profiles are trusted across demanding engineering sectors:
- Aluminium Systems: Provides superior high-temperature sealing resilience across architectural and industrial aluminium framing systems, enhancing both safety and energy efficiency.
- Façade Industries: Harmonizes visual aesthetics with life safety by acting as a UV-resistant, ozone-resistant, fire-rated perimeter barrier aligned with stringent building codes
- Aviation Industry: Serves as precision protective sealing for critical aircraft components exposed to extreme thermal and environmental conditions
- Automotive Industry: Adds an extra layer of fire-resistant protection to essential gaskets and under-hood or cabin sealing components
5. End-to-End In-House Manufacturing Control
Consistent fire-safety performance begins on the factory floor. Operating from the UK (Luton, LU2 7AS) with a state-of-the-art manufacturing facility in the UAE, BP Materials UK maintains full quality control across every production stage:
- In-House Tooling: Rapid, precision die fabrication for custom fire damper, louver, and curtain-wall geometries
- In-House Mixing Unit: Custom rubber compounding and colour matching engineered to meet exact UL fire-retardant and environmental targets
- Precise Extrusion Lines: High-accuracy extrusion for dense profiles, closed-cell sponge, dual-durometer co-extrusions, and high-temperature tubing
- Compression Molding, Splicing & Quality Control: Custom molded parts, vulcanized spliced corners, and rigorous in-house inspection on every batch
6. Frequently Asked Questions
What do the UL 723 Flame Spread Index (0) and Smoke Developed Index (25) mean?
Under UL 723 (ASTM E84), a Flame Spread Index of 0 indicates zero measured flame propagation across the tested silicone strips during the 10-minute fire exposure, while a Smoke Developed Index of 25 confirms very low smoke emission—vital for protecting visibility and air quality in building fires.
Which UL standards apply to Berzelius® / Calorpyro fire-retardant silicone seals?
Our fire-rated silicone portfolio is engineered to meet UL 723 (surface burning characteristics), UL 555S (smoke dampers), and UL 94 flammability criteria.
What is the operating temperature range of BP Materials UK silicone rubber?
Our silicone rubber compounds retain flexibility and sealing integrity across an extreme thermal window from −50°C to +350°C.
Request the UL 723 Test Report, Samples & Technical Quote Specifying fire-rated silicone blade seals, closed-cell sponge gaskets, fluorosilicone trim seals, or custom LSR components? Contact our technical sales team with your profile drawings or project requirements. Product Page: bpmaterials.uk/ul-certified-silicone-rubber-fire-retardant-rated-seal-gasket-fluorosilicone-sponge-pads-liquid-lsr/ Email: sales@berzelius.uk | Website: www.bpmaterials.uk UK Office: Luton, LU2 7AS, Great Britain | Manufacturing: UAE |